Know Your Vehicle's Trunk Lid Better
What Is Auto Trunk Lid?
Every transportation
vehicle requires a certain amount of storage space for passengers and driver’s
luggage or any such requirements and that's where a trunk or boot comes in.
Modern cars are made to have maximum trunk space for the convenience of the travelers
and to allow hauling cargo or goods. A Trunk Lid is the gateway to this storage compartment.
Where Auto Trunk Lid Is Located?
This may come as no surprise but the trunk lid is
situated on the rear end of the car above the rear bumper and covering the trunk.
Important Features Of Auto Trunk Lid
Trunk lids primary function is pretty much known
to all but it also has a few other tricks up its sleeve as some boot lids come
with a wing or spoiler that can greatly enhance the aerodynamics and appearance
of your car. The trunk lid's main function is to allow access to the trunk or
boot of the car for storage and also in most cars, the spare wheel and the
tools for a quick fix while you’re on the road.
Frequent Problems With Auto Trunk Lid
The trunk lid is made of metal which usually
makes them heavy and can cause the opening mechanism to break after long like
the assists or the hinge. A trunk lid is often slammed and bashed while opening
and closing and are mistreated during its life while loading or unloading
luggage or cargo and the ever-changing weather which tends to damage the trunk
lid and can also eventually render it far beyond repair. A new trunk lid is a
feasible option for those looking to add value to their car as the trunk lid is
often times the most damaged body part apart from the bumpers. The trunk lid
latch undergoes a lot of abuse and is susceptible to breakage. Electric release
mechanisms are always prone to failure as the vehicle gets older.
Symptoms Of Bad Auto Trunk Lid
Here are the symptoms of a broken or failing
trunk lid:
- Opening the trunk lid requires more effort than
usual which may mean the opening assists are broken.
- It doesn’t sit flush with the rest of the
bodywork or there is an overlap between the lid and the quarter panel.
- The trunk lid doesn’t latch or lock properly.
- There may be sounds emanating from the trunk lid
while opening and closing which may signify a broken hinge or even a rusted
one.
- There is visible discoloration or bubbling on the
trunk lid panels which may mean there is rust or corrosion stemming in the
panels.
Tools Needed For Auto Trunk Lid
The trunk lid removal and
installation will require the following tools:
Top Brands For Auto Trunk Lid
If you know which car
parts brand suits the best for your Trunk Lid, then it would save a lot of your
decision-making time. What we believe is that picking a particular brand would
always be helpful in reducing the clutter, and at the same time would make it
easier for the customers to find what they are actually looking for. That’s why
we have listed out some top brands for Trunk Lid below as follows: -
Related Parts Of Auto Trunk Lid
Do you want to gain some
more knowledge about the related parts of the car Trunk Lid? Then you have
arrived at the right place. The related parts of the Trunk Lid are as follows: -
Total Costs & Repair Times, Effort For Auto Trunk Lid
The trunk lid is a car’s
most essential element and therefore making sure it stays intact is crucial.
Regular maintenance of the trunk lid involves lubricating the hinges and
latches with grease for corrosion prevention and ease of operation, inspecting
the panel for any signs of rust, making sure the lid operates smoothly, are few
ways to prolong the trunk lids life. Although, they are prone to failure and getting
a new trunk lid is necessary for the protection of your cargo. The trunk lid
can set you back by about 200- 1500$ depending on your vehicle.
How To Change Auto Trunk Lid?
It is fairly easy to
remove the trunk lid and the procedure for removal and installation is as
follows:
- Open the trunk lid and
remove the covering mats or liners from the trunk in order to access the
connections and disconnect them.
- Remove any mouldings that
cover the hinge and locate the bolts that secure the hood to the hinge.
- Undo the bolts using a
ratchet and the appropriate socket and remove the assist.
- The lid can be removed
from the vehicle and replaced with the new one.
- To install the new trunk
lid follow the above steps in reverse.