Give Your Car A Sleek Look With Hood Mouldings

Wondering what is a hood moulding? Coming to hood moulding definition, we can put it as follows: A hood moulding is the one that gives your car that sleek look. It is made up of high-quality plastic material. The material used for making this hood moulding is very durable and highly corrosion resistant. The hood moulding is made to easily withstand the small stones, mud, road debris and water. To know more about hood moulding and the material used to make them, have a look at subsequent sections.

Hood mouldings not only fit the front of your car but they fit in two different locations. The hood mouldings fit in the front and the passenger side of the car. The front hood mouldings cover the massive part of the vehicle hood and are generally longer than the one on the passenger side. To make sure the hood moulding looks the best, it needs to be fitted properly. So, this is one of the major concerns while buying a new hood moulding for your vehicle, do make sure that they will fit properly, not an inch longer or not an inch shorter.

Are you thinking of buying a new hood moulding for your vehicle? If YES, then make sure you take into consideration the material used factor into consideration. Talking about different types of materials used in making hood moulding, we have listed out few of the common materials used as follows:

1. Plastic Hood Mouldings - plastic is the most commonly used material in the making of auto hood moulding. The reason it is used widely because of their corrosion and dent resistant qualities. In addition to these, we can’t ignore the fact that they are very light too, they weigh about 50 percent less than the steel counterparts. It’s not all gains when it comes to plastic, as they are very resilient and difficult to repair when damaged. Plastic also has a tendency to warp under extreme heat conditions.
2. Metal Hood Mouldings - Metal is also one of the commonly used materials when it comes to making of hood mouldings. They are highly malleable and can be altered with ease. Even if the metal hood moulding an inch longer or an inch shorter, it can be easily made to fit the car either by welding or pounding. At the same time this advantage turned into a disadvantage too as it makes them more likely to develop dents, dings, stone chips and corrosion. Also compared to plastic hood moulding, metal mouldings are heavier and comparatively expensive.
3. Rubber Hood Mouldings - The third type of commonly used material is rubber. Rubber is strong and also possess good abrasion resistance. This makes rubber hood moulding one of the toughest one out of all in the market of hood mouldings.

An additional line of advice we would like to add here is that while making a buying decision be sure of the material. Do check carefully and stay away from low-cost latex products as they generally ten to shrink under high temperatures. 

There are a number of skilled auto mechanics who have a goal of opening their own car repair shop at some point in their career. But let’s face it; if you want to put up an efficient as well as profit making shop, then you might need much more than mechanical skills. There are a number of tools which you might need to perform the car repairs quickly as well as reliably. Auto repair equipment that you will need to repair or replace your bad hood moulding may include:

• Car Dry towel or rag
• Nose pliers
• Hood mouldings
• Plastic and emblem adhesive

When it comes to vehicle owner’s choice, the brands really matter a lot. You might pay a premium for a specific car part brand, over time, as it has created a perception of quality, stability as well as trust. There are some leading car parts brands which are more than just products or services as they give rise to memories and emotions related with the quality. So have a look at some of the top brands for Hood Moulding.

Various Manufacturers Hood Moulding

Having corroded hood moulding? Or are you hood mouldings suffering from stone chips and dents?

Did it shrink or warp during the hot summer season? If your answer to any of these questions is a yes, then now is the time to replace those bad hood mouldings with new ones. Why? Well because when it comes to your sleek car appearance it is never a good idea to compromise. Here is your step by step guide to replace those bad hood mouldings now:

Step 1

Before you attempt to reattach or re-install your vehicle’s hood mouldings, one important thing that you need to take proper care of is to make sure both the car hood surface and mouldings are thoroughly cleaned. There is a high chance of plastic pieces being stuck on the car mouldings from the last attachment to your car. Make use of a rag or towel and clean the parts properly with alcohol until you are sure of being free from any debris.

Step 2

Second step is to ensure that all the car’s hood fasteners are still intact as we broke off the hood mouldings from the hood. Also make sure that they are not broken or chipped off because they are going to serve as your car’s hood moulding attachment.

Step 3

Before you try and attempt to re-install the metal fasteners to the plastic clip on the hood moulding, make it a point to adjust the slanted half v shaped part. This will help you to make sure that you have a perfect fit.

Step 4

Now make use of emblem and plastic adhesive or glue to reattach the hood moulding in its proper place.

Step 5

very gently push it in and then press it down, hold on for about five minutes until you are sure it is securely in its place.

Step 6

Give the glue some time to dry and then very softly and carefully clean the hood and surrounding areas.

Your hood moulding is installed and now you can enjoy that sleek car appearance back again.