What You Should Know About Car Glove Box
What Is Car Glove Box?
A glove compartment,
also known as the glove box is a sealed or unsealed container that is present
in any vehicle and is used for storing items. The glove compartment is also
known as a jockey box or a cubbyhole in some regions. The glove box is usually
found above the footwell of the front seat passenger in a vehicle. It is found
inside the dashboard and is also used for storing miscellaneous items. Some
common things that are kept in the glove box are owner's manuals, insurance
paperwork, maps, a flashlight, napkins, or a tire gauge. Its original purpose
was to store driving gloves and it was found near the floor door on the
driver’s side. In order to keep your hands clean, the driving gloves were worn
and were considered as essential equipment in early vehicles. In the early
days, vehicles did not have hard tops and if you drive fast, the hands might
cool quickly and turn numb. The glove box is found in convertibles, a coupe,
and every other.
Material Used in Car Glove Box
The materials used for
making glove boxes are plastic, aluminum, and stainless steel. Stainless steel
can always be the best choice because of its chemical, as well as,
temperature-resistant properties. It will not break easily even if you force
open the glove box as it is long-lasting and durable. On the other hand,
plastic can also be a good choice as you can repaint it easily to match the
interior of the vehicle.
Important Features Of Car Glove Box
Here
are some of the features of the glove box.
- In
most vehicles, the glove box has a latch. You can also lock the compartment.
- This
can be helpful while using valet service as you cannot use the valet key to
open the glove box.
- The
glove box can be opened only with a single master key. It also acts as a handy
security tool while you park a convertible with the top down.
- Small
items can be easily locked in the glove compartment and made sure that they
remain safe without the need to raise the top of the convertible.
- Even
in some vehicles, the glove box has an area that can be used for holding cups
when it is open.
- There
is also a pen or pencil holder. In a few of the models, the glove box is
temperature-controlled and is used like a cooler.
- Vents
are present in some models from the heating/air conditioning system. Few cars
have multiple glove compartments where you can keep a lot of things in your
vehicles, such as small tools and other belongings.
- An
internal light will automatically turn on as the glove compartment is opened in
some vehicles. This can help you to search for items quickly in the glove
compartment in the dark.
- Replacement glove
compartments
are also available. If the original glove compartment is broken or damaged due
to some reason, then the replacement glove compartment might be necessary.
- You
can easily organize the aftermarket accessories in the glove box. You can also
safely keep the important travel documents such as registration and insurance
cards.
- By using an aftermarket organizer, important documents and other items can often be stored in the organizer and removed easily in an envelope-style packet without the need to gather loose items from the glove box.
Purpose Of Car Glove Box
The glove
box, also known as the glovie or the glove compartment, is a small storage nook
that is present under the dashboard of the front passenger. Today, this glove
box is used for storing the owner’s manual, tissues, pens, electronic cables,
sunglasses, and much more.
These
days, it’s simply used for stowing the owner’s manual, tissues, pens, electronic cables, and
sunglasses. No one will ever store their puffy winter gloves in that narrow cubbyhole.
Tools Needed For Replace the Car Glove Box
Are you thinking of repairing your Glove Box on your own? Then there is one thing which you must have, that is the right tools needed for repairing your Glove Box. It is essential to make sure that you are outfitted with the right tools to get the work done properly. Have a look at some tools which you might need to get started with your repair work: -
- 7mm
socket nut driver
- Lint-free
cloth
Top Brands For Car Glove Box
You won’t have to think a lot while purchasing if you are already using a particular car part brand and are fully satisfied with it. There are a lot of people who trust a specific brand and would go with it once again with a minimum of thought. Here we have the best Glove Box brands to help you out in choosing your favorite one in case you don’t have any. So, what are you waiting for? Have a look below and choose the best brand for your Glove Box.
Total Costs & Repair Times, Effort For Car Glove Box
Glove
Box replacement cost can differ wildly depending on the application, the brand
of the Glove Box as well as who does the work. All you have to do is to replace
your faulty Glove Box with us online and then you can leave your car to the
mechanic and pick it up a few days later. Just be sure that the car mechanic is
highly skilled and has a good reputation. Sometimes the additional service
level might cost you more than what you have expected. We also recommend you to
take pictures of your car before you leave it with them so that you are sure
that later on it is returned back to you in an unharmed condition.
Glove
boxes don't cost a fortune. It's a budget-friendly accessory you can use for a
long period of time, so it's worth investing your money in. Standard plastic
glove boxes cost less than $50, while stainless steel and aluminum ones are
priced at around $50 to $60. Basically, the price will go up if the glove box
has special built-in features.
How to Replace Car Glove Box?
Here
is a step-by-step procedure on how to change the glove box:
Step
1
Take
off the two plastic stops that are present at the back by lowering the glove
box. You can easily pull them out if you twist the plastic stops a quarter of a
turn in a counterclockwise direction.
Step
2
Start
working on the lock by pulling the glove box forward. The glove box can get
easily scratched and so be careful not to hit or knock the plastic panel with a
tool. And moreover, the scratch marks will be harder to remove. Now use a 7mm
socket nut driver to take away the two screws which secure the old locking
latch and pull it gently out of the glove box.
Step
3
Reinstall
the screws by inserting a new locking latch. Ensure that the new latch is
properly secured before you start pushing back the glove box.
Step
4
On
the left and right panels of the glove box, you must push a plastic tab into
the holes Use your fingers and rotate each tab a quarter of a turn clockwise.
Before you close the glove box lid, wipe the edges of the box with the help of
lint-free cloth and remove the dust buildup. Now close the lid and open it
again and check if the newly installed locking latch is working properly.