Question 1

Why choose Powerstop z16 Brake Pads?

Accepted Answer

Z16 pads are thermal scorched for a faster break-in as well as chamfered and slotted to ensure noise-free braking. Positive mold technology delivers consistent wear and performance while the powder coated backing plate resists rust and corrosion.

Question 2

What are ceramic pads ?

Accepted Answer

Ceramic Pads are Brake pads that are made from a ceramic composite material which increases brake pad longevity as well as reduced noise while braking.

Question 3

Do Ceramic Brake Pads handle heat better ?

Accepted Answer

Compared to organic brake pads, ceramic brake pads can be more reliable in a broader range of temperatures and driving conditions. The material will dispate heat quicker due to its build. Thereby avoiding brake fade.

Question 4

How about Semi Metallic brake pads ?

Accepted Answer

Semi Metallic brake pads do provide a great stop power comparable or possibly surpassing that of ceramic pads.

Question 5

What is Brake Fade ?

Accepted Answer

Brake Fade occurs when your brakes are utlised aggressively with no time to rest, Brake fade is very dangerous as it reduces your vehicles ability to at the factory stopping distance.

Question 6

Do i need to change my rotors ?

Accepted Answer

Generally replacing rotors and pads ensures brake performance is at manufacturer specfications. by not replacing the rotors the new pads can be damaged during the intial brake in period as the uneven surface of your old rotors can create grooves into your new brake causing ,squeeling sounds and a loss of optimal braking performance.

Question 7

What can happen if i dont change my brake rotors and just replace the brake pad ?

Accepted Answer

The new brake pads can possibly cause the older brake rotors to warp thereby causing pulsation and reduced braking. At which point you'd have to change the brake rotors and redo the brake job in terms of greasing and cleaning all brake compoents

Question 8

Should i be cleaning up the hub area while the rotors is off ?

Accepted Answer

After removing the old rotor it is best practice to clean the hub face with a Wire Brush to remove rust buildup and apply Anti Seize to prevent future buildup.

Question 9

Once installed do i need to perform a brake bedding procedure ?

Accepted Answer

In short YES ! , by bedding your brake pads you ensure your brake components ease into use and therby increasing there lifespan. Think of it more like a break in period for your new parts.

Question 10

Do I need to buy brake pads for both wheels or do they come in a set?

Accepted Answer

A set of rear brake pads will include pads for both rear wheels meaning you will get two pairs of brake pads.

Question 11

Do all brake pads come with a wear sensor?

Accepted Answer

Most brake pads come with metal tabs that create a squealing or screeching noise when the brake pads are worn out. Many modern vehicles have electronic brake wear sensors, which need to be purchased separately when replacing brake pads. However, some brands include electronic brake wear sensors. Read the product description for more information.

Question 12

How is the PowerStop Z16 Evolution Designed?

Accepted Answer

Ans: PowerStop Z16 Evolution Clean Ride Ceramic brake pads are designed for noise-free braking with dual rubber backed shims. The noise reduction is 6 times more than plain steel shims. For fast break-in, the surface of the brake pads are thermal scorched. Evolution pads consists of a true ceramic formula that helps to keep the wheels clean and it will not  wear-out the rotors.

Front Ceramic Pads by POWER STOP - 16-473

LIMITED STOCK - Hurry up (only 1 left)

Product Highlights

Product Overview

Product Information

POWER STOP

Fitting Vehicle(s)

Frequently Asked Questions