Question 1

Should i be replacing my brake pads when replacing my rotors ?

Accepted Answer

Yes simply put ! , The reason for replacing brake pads when replacing rotors is that your older brake pads made have indentations from the older rotors causing the pads surface not to be leveled there by reducing braking power and allowing debris to enter and causing unwanted squeeling as well as possibly damaging the surface of your new rotor

Question 2

What are coated Rotors ?

Accepted Answer

Coated rotors implies that the rotor is sprayed with a chemical layer that prevents corrosion/rust and with said coating allows the rotor to have an increased lifespan

Question 3

What are vented rotors ?

Accepted Answer

The term vented applies to the brake rotors having a space between its two sides allows for the rotors to cool down quicker in hot temperatures or demanding conditions . Vented rotors are extremly prefereed and opted by the Canadian automotive industry.

Question 4

What is a solid Rotor ?

Accepted Answer

A solid rotor refers to a rotor that is built with a single piece of steel or carbon composite. It is very commons to see this type of rotor installed on the rear axle of many daily driven vehicles.

Question 5

Can i mix and match brake pad and brake rotor manufacturers ?

Accepted Answer

Absolutely when it comes to brakes for a vehicle the most important fact is FITMENT. if it fits it will work according to specifcaition of the parts manufacturer. Ideally try to keep it to the same manufacturer as that combination has been thoroughly tested

Question 6

Once installed do i need to perform a brake bedding procedure ?

Accepted Answer

In short YES ! , by bedding your brake pads you ensure your brake components ease into use and therby increasing there lifespan. Think of it more like a break in period for your new parts.

Question 7

Powerstop Evolution genuine geomet® coated rotor is ideal for?

Accepted Answer

Daily drivers, Commuting, Budget-Conscious customers, and stock replacement upgrade.

Question 8

Are Powerstop’s evolution geomet-coated brake rotors long-lasting?

Accepted Answer

Yes, the brake rotors are fully coated including the inside of the vanes with genuine geomet coating for long-lasting protection against rusting and corrosion. The aluminum silver color of the coating complements the alloy wheels too.

Question 9

Do Powerstop’s evolution geomet-coated brake rotors offer a great fit?

Accepted Answer

Yes, in order to ensure a hassle-free installation, the rotors are equivalent to the OE weight and vane configuration for offering a perfect fit to the vehicle.

Question 10

Is the break-in procedure of the Powerstop’s evolution geomet-coated brake rotors critical to the brake performance?

Accepted Answer

Yes, absolutely. The reason behind a proper break-in is to set up an even layer of friction material deposited on the rotors from the brake pads. Even distribution is extremely important for optimum performance.

Front Disc Brake Rotor by POWER STOP - AR85150EVC

Product Highlights

Product Overview

Product Information

POWER STOP

Fitting Vehicle(s)

Frequently Asked Questions