Everything You Should Know About Factory Guage Faces

Factory gauge faces are decent looking kit, they are the same for every car and are not made as an individual’s choice. The entire gauges are fitted in the instrument clusters. A factory gauge faces is the backdrop piece of the instrument cluster with printed numerical markings for RPMs, speed, fuel, and other criteria. Factory gauge faces are where the eye falls constantly, and they define the look of the in-dash instrument cluster. Because factory gauge faces are located behind a protective layer of clear plastic, they typically don't suffer from damage, spills, or fading.

Gauge faces can be factory gauge faces and custom gauge faces:

1. Factory Gauge Faces - Factory gauge faces are decent looking kit, they are the same for every car and are not made as an individual’s choice. The entire gauges are fitted in the instrument clusters. The driver cannot add or remove any gauge from the cluster unit, nor can he add extra lights. The factory gauge faces are mostly black or white. Every cluster is tested for quality assurance and comes ready to install. Installation is quick and easy.
2. Speedometer gauge - Speedometer is a gauge that indicates the current speed the vehicle is traveling. Speedometers can be digital, like a digital clock, clearly indicating the speed, or mechanical using a needle to indicate the speed of the vehicle.
3. Fuel Gauge - The gauge notifies the driver how much fuel is left in the vehicle to burn for combustion.
4. Tachometer - The tachometer’s job is to display the speed of the engine in revolutions per minute or RPMs.
5. Water Temperature Gauge - This gauge communicates the temperature of the vehicle’s engine coolant.
6. Engine Oil Pressure Gauge - The oil pressure gauge does not monitor the level of oil in the engine but instead the pressure of the oil is pushed through the engine using a sensor.
7. Custom Gauge Faces - There are thousands of custom gauge face choices to color-match or contrast the interior. Anyone can personalize the instrument cluster with a splash of color. Custom gauge faces have vivid backdrop colors, more stylish designs, backlighting with distinctive hues, and materials that are visibly higher in quality. Additionally, there are analog or digital, electrical or mechanical, and can choose between in-dash, pedestal, or dash top fitment styles for certain gauge applications. The custom gauge faces can even be made in a different design.

Factory gauge faces are decent looking kit, they are the same for every car and are not made as an individual’s choice. The entire gauges are fitted in the instrument clusters. The instrument clusters are complex electronic components, and the heat and vibration in the vehicle environment can take their toll, causing individual gauge or in some cases total cluster failure. The driver cannot add or remove any gauge from the cluster unit, nor can he add extra lights. The factory gauge faces are mostly black or white. Every cluster is tested for quality assurance and comes ready to install. Installation is quick and easy. Every cluster is then programmed for its function. VIN is also programmed in the unit. Gauges are responsible for a specific type of parameter like fuel level, air/fuel ratio, water/oil pressure, differential/coolant temperature, etc. A Factory gauge has only some important gauge like fuel level, coolant temperature, tachometer and speedometer, rest all are warning lights symbols.

A gauge face is the backdrop piece of the instrument cluster with etched or printed numerical markings for RPMs, speed, fuel, and other criteria. Factory gauge faces are where the eye falls constantly, and they define the look of the in-dash instrument cluster. Because factory gauge faces are located behind a protective layer of clear plastic, they typically don't suffer from damage, spills, or fading. When the engine is cranked the light glows in the instrumental cluster and the needle can be seen moving on the gauge faces.

The instrument clusters are complex electronic components, and the heat and vibration in the vehicle environment can take their toll, causing individual gauge or in some cases total cluster failure. The needle on a gauge may stop moving, or the information display may go dark, causing a total loss of information from the engine control module to the driver. This may prevent the display of the odometer or serious engine warning information like low oil pressure or excessive coolant temperature. Repairing such defects can be time-consuming and expensive, the most cost-effective method is to replace the instrument cluster with another unit.

Do you like repairing your car on your own? Thinking of opening up your own car body shop? It is a great business opportunity if you love cars and possess a good work ethic. Now if you want your shop to be successful, then you will require a combination of effort as well as car mechanic training. And of course, the correct equipment which would upgrade your speed as well as make your repair work easy. If you will have the right tools, then you can easily meet the demands of today's car body structures. Here are some of the most essential tools which you might need to repair your Factory Gauge Faces.

• Clip Plier
• Set Of A Screwdriver
• Basic Socket Wrench Set
• OBD Device

If customers trust a brand, then it would make them loyal, and if they are loyal, then they will surely buy more. We are well aware that customers want comfort, cheerfulness as well as satisfaction in their lives and that’s the reason why we offer top quality auto parts brands to our customers. We make sure to provide a positive experience to our consumers from the brands which we are offering so that they can form an opinion that a particular auto parts brand is trustworthy and would give them peace of mind while they are purchasing it for their car. Here we have listed out some top brands for Factory Gauge Faces.

There might be a big-picture overview of Factory Gauge Faces in your mind, and now it’s time to look at its related components.

• Cluster Unit
• Dashboard
• Wiring Harness
• Sensors
• Fuse

For replacing factory gauge faces, labor would cost about $60 to $120, depending on the type of vehicle. To remove the factory gauge faces, other related parts have to be removed first which may take about 30 to 45 minutes.

Disconnect the battery cable terminal from the battery before beginning the work. Check which gauge faces have to be replaced. Since different car models have different ways of removing their instrument cluster. Remove the cluster safely without damaging it. Remove the socket connection from the backside of the cluster. When the cluster is out, then remove the cluster cover. Safely remove the dial of the damaged gauge. Be careful though that the needles are pretty fragile and can easily break. To remove the gauge faces there will be some type of screw holding the gauge faces, remove those and carefully pull-up the gauge faces. There are small removable plastics that hold this gauge faces level and steady. Take the new factory gauge faces, fit them in their proper place and reverse the process for fitting as removed. After the fitment of all the parts delete the entire fault from its memory with the help of the OBD device.